Are you using incandescent light bulbs even now? We must now make a change and go in a different direction. Incandescent light bulbs are being discouraged since they consume too much energy, increase the price of a household's monthly energy bill, and are gradually being phased out altogether. 

After years of raising standards, the Department of Energy under President Joe Biden finally settled on a new efficiency rule requiring light bulbs to produce at least 45 lumens per watt. The end of production for incandescent bulbs means that the technology is doomed.

The time to make a move to LED lights is now, and there are many good reasons to do so. To begin with, LED lights to last far longer than incandescent bulbs do while still producing the same amount of light while using a fraction of the power. If you replace all of the bulbs in your home, you may help the environment and save your electricity costs.

The US Energy Department estimates that consumers will save over $3 billion on their power bills as a result of this new regulation and that 222 million metric tons of carbon emissions will be avoided as a result of this program. 

LED Lights

LED lights have many intriguing and worthwhile features, such as color-changing bulbs and bulbs that connect with your home security system or voice assistant of choice. These may be the deciding factors for you if the economic and environmental benefits aren't.

However, selecting an appropriate LED is not the same as choosing an incandescent bulb. Consequently, there are five things you should know before hitting the stores.

1. Use lumens rather than watts

Put away your incandescent light bulbs; you won't need that much power here. You probably already know to check the bulb's wattage as a proxy for its brightness when you're out shopping for lights. 

Watts Lumens

Because the wattage of an incandescent bulb is directly proportional to the amount of light it emits, increasing the wattage makes the tungsten filament within the bulb glow brighter. LEDs' luminosity is measured in a slightly different way.

Wattage is not a measurement of light output but rather the amount of energy required to power the bulb. For incandescents, there is a recognized association between the watts drawn and the brightness generated, but for LEDs, watts aren't a reliable measure of how brilliant the bulb will be. This is because LEDs strive to maximize efficiency without sacrificing light quality, and some LEDs are better at this than others.

2. Pick the correct LED color

LEDs are available in a wide variety of colors, whereas incandescent bulbs only emit a warm, yellowish light. LEDs come in a wide range of hues, but soft white (also known as warm white) and bright white are the two most common choices (also called daylight).

LED Lights

Bulbs branded as bright white or daylight will provide a whiter light, closer to daylight and similar to what you see in workplaces and retail establishments, while bulbs labeled as soft white or warm white will generate a yellower, candle-like glow, comparable to incandescents.

3. LED bulb costs more upfront but ends up saving money

Like hybrid autos, LED light bulbs have a higher initial cost but lower lifetime operating costs. A standard incandescent bulb used to cost no more than a dollar at the hardware store. 

Then, though, LEDs appeared, and they quickly became much more expensive. Thanks to years of innovation and market rivalry, today you can purchase a wide variety of high-quality LED light bulbs for under $5 each.

LED Light bulb

On the other hand, monetary considerations go further. Expenditure on electricity to run the bulb must be considered, though the amazing part about LEDs is that they are incredibly cheap to run. 

Using a standard 60-watt incandescent bulb for an average of three hours a day will cost you around $7 in energy costs over a year. An LED bulb that can replace a 60-watt bulb uses only 8 watts of power and will only increase your electricity cost by a dollar over a year.

4. Beware non-dimmable LEDs

LEDs' unique wiring can make them incompatible with standard dimmer switches. Switch replacement may be required in certain circumstances. Sometimes the cost of a suitable LED is more than the original.

Existing residential dimmers were probably developed for use with incandescent bulbs. A dimmer like that works by rapidly and repeatedly reducing the power of the light bulb below the threshold of human perception. Since LEDs consume far less power, they aren't necessarily compatible with standard dimmer switches. 

Dimmable LED

If you want to use LEDs with a dimmer switch, the first thing you should do is purchase bulbs that are compatible with dimmers. The vast majority of LED bulbs sold today are "non-dimmable," implying they lack any sort of built-in dimming circuitry. This is OK if you're using the bulb in a non-dimmable fixture, but it's the worst possible thing for anyone who likes to keep the lights on a low, dimmer setting.

Finally, smart lamps are worth looking into if dimming is a feature you regularly use at home. Since most have their dimming processes built in, a dimmer switch is unnecessary. These types of dimmer switches are fantastic because they eliminate annoying flickering and buzzing, and they can be programmed to work with voice assistants like Siri or Alexa, allowing you to issue requests like "adjust the lights to 20 percent"

5. LEDs aren't appropriate for every type of light fixture

LED Lights

Putting an LED bulb in the right spot will save it from burning out too soon. It's common knowledge that LED bulbs emit less heat than incandescent, but that doesn't mean they don't generate some. 

Even though the base of an LED bulb has a heat sink, the bulb itself does not overheat. As a result, the LED bulb can keep its cool and continue to deliver on its promise of a long lifespan.

LED Bulbs

LED bulbs, as a reminder, are technological gadgets. In the same way, you shouldn't let your phone or computer become too hot. Thus, in enclosed fixtures, incandescent, fluorescent, and halogen lights are all appropriate. LEDs will also work, although the heat generated within the fixture may shorten the life of the bulb.